Top 10 Secure Badge Holder – Badge Holders

As an Amazon Associate I earn from qualifying purchases.

1. ID Stronghold

#ad

Heavy Duty Hard Plastic ID Badge Holder, RFID Blocking Secure Badge Holder, ID Stronghold, FIPS 201 Approved, Black, Molded and Assembled in The USA, Duolite 2 Card ID Holder, Poly Carbonate

#ad
ID Stronghold #ad - Indestructible: Molded from Poly Carbonate for military level toughness and durability. Slim design: looks sharp and available in 9 colors to match your uniform, work or business attire. 2 card holder: conveniently carry two key cards, held tight so you never lose your identification. Rfid shielded: protect your credentials with our FIPS201 Approved badge holder, for 13. 56mhz cards. Usa made: molded and Assembled by our expert team in Florida facilities, millions shipped worldwide.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height0.31 Inches
Length4 Inches
Weight0.04 Pounds
Width2.38 Inches
Part NumberIDSH2004-001B

2. ID Stronghold

#ad

FIPS 201 Approved RFID Blocking Security, Molded and Assembled in The USA, Identity Stronghold, Secure RFID Badge Holder for 1 Card, Black, Heavy Duty Hard Plastic ID Badge Holder

#ad
ID Stronghold #ad - Indestructible: Molded from Poly Carbonate for military level toughness and durability. Squeeze to read: pinch the top to temporarily remove your card from the shielding and gain access. Usa made: molded and Assembled by our expert team in Florida facilities, millions shipped worldwide. Rfid shielded: protect your credentials with our FIPS201 Approved badge holder, for 13. 56mhz cards. Ergonomic: looks sharp and available in 9 colors to match your uniform, work or business attire.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height0.5 Inches
Length4.5 Inches
Width2.75 Inches
Part NumberIDSH1004-001B

3. ID Stronghold

#ad

ID Stronghold Secure Badge Holder Duolite, FIPS 201 Approved, PIV, CAC and Work Cards, Heavy Duty Plastic Badge Protector, RFID Blocking 2 Card ID Badge Holder with Lanyard and Retractable Reel

#ad
ID Stronghold #ad - Id stronghold is the original rfid blocking Company with FIPS 201 Approval for all our ID holders. Rfid shielded - protect your contactless cards from electronic pickpockets with the industry's best. Lanyard & reel included - 36 x 3/8" Lanyard with J Hook & Carabiner Retractable Badge Reel. Made in the usa - our slim polycarbonate frame is tough as nails and will last you for years! 2 card holder - securely holds one card on each side so both cards are easily displayed.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height1 Inches
Length5 Inches
Weight0.09 Pounds
Width4 Inches
Part NumberIDSH2047

4. Identity Stronghold

#ad

Identity Stronghold Secure Badge Holder Classic, Clear IDSH1004-001B-clr

#ad
Identity Stronghold #ad - Physically protects card, weather- and water-resistant. User can easily insert and remove card from holder with one hand. Fips 201 approved Products. 100% made in USA. Blocks rfid chips in cards from being read without permission.
BrandIdentity Stronghold #ad
ManufacturerIdentity Stronghold #ad
Height1 Inches
Length4.5 Inches
Weight0.02 Pounds
Width3 Inches
Part NumberIDSH1004-001B-clr
ModelIDSH1004-001B-clr

5. GOVO

#ad

Durable Polycarbonate ID/Credit Holder with Metal Clip and 4 Cards Slot Holds 1to 4 Cards Black, GOVO Badge Holder/Wallet

#ad
GOVO #ad - You can carry your credit cards, driver license and work ID all in one in this compact holder. The steel clip can also be used as a cash clip. Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity.

The clip is made from manganese steel making it strong and durable. The opening on top of the clip is designed for connecting to lanyard or carabiner. Designed and engineered by govo in ohio, usa. Patented clip: the first and only badge holder with a metal clip allow you to carry your ID on your belt, pocket, key chain, backpack or a lanyard. Unlike plastic retainer, metal spring does not lose elasticity.

Weights 1. 4 oz. Durable and light weight: the holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners. Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards. The spring holds cards on the sides so it won’t damage your cards or let them slip out.
BrandGOVO #ad
ManufacturerGOVO #ad
Height0.38 Inches
Length3.8 Inches
Weight0.08 Pounds
Width2.6 Inches
Part NumberGOVO_BK_P

6. Identity Stronghold

#ad

Identity Stronghold Secure Badge Holder Duolite, Black IDSH2004-001B-blk

#ad
Identity Stronghold #ad - Fips 201 approved Products. 100% made in USA. Blocks rfid chips in cards from being read without permission. Holds 2 iso7810 id-1 standard credit card size contactless smart cards. Open face design allows for clear visual inspection of cards while in holder.
BrandIdentity Stronghold #ad
ManufacturerIdentity Stronghold #ad
Height0.3 Inches
Length4 Inches
Weight0.04 Pounds
Width2.4 Inches
Part NumberIDSH2004-001B-blk
ModelIDSH2004-001B-blk

7. Specialist ID

#ad

Hard Plastic with Heavy Duty Breakaway Lanyard w Quick Release Metal Clip & Key Ring One Holder / 3 Cards Inside Black, Specialist ID Vertical Top Load Three Card Badge Holder

#ad
Specialist ID #ad - Rigid & rugged polycarbonate plastic - hard plastic vertical format i. D. Carry all your cards in one holder - tough multi-card protector holds common access smartCards and Proxy Key-cards in One Case - Perfect for When Needed on a Regular Basis FAA, Security Access, TSA, Customs, Port Authority, Military, and Department of Homeland Security.

Quick release lanyard with safety breakaway clasp - features a detachable keychain with Metal Badge Clip - Carries Your Work Badges and Keys. Top loading & fully enclosed for 2 - 3 cards - all cards load from Top of Sturdy Rigid Case Can Hold 3 Standard CR80 30 Credit / Drivers License Sized Badges.

Clear front window - front badge has visible display for picture ID’s, Dual Thumb Lever on the Back Can Slide up Smart Chip Cards or Swipe & RFID Prox Access Cardbadges. Badgeholder with heavy duty safety break away neck cord lanyard - Protect Your Valuable Access, PIV, CAC, TWIC or Government Employee Name Badge from Damage and Loss.
BrandSpecialist ID #ad
ManufacturerSpecialist ID #ad
Height1.1 Inches
Length4.4 Inches
Weight0.1 Pounds
Width2.8 Inches
Part NumberSPID-9070
ModelSPID-9070

8. ELV

#ad

ELV Badge Holder with Zipper, School ID, PU Leather ID Badge Card Holder Wallet with 5 Card Slots, 1 Side RFID Blocking Pocket and 20 inch Neck Lanyard Strap for Offices ID, Driver Licence Black

#ad
ELV #ad - Front anf back Card Slots for easy management and access. Id window with clear cover features visibility and protection, cash, event or location passes, makes it easy to scan ID Cards. Innovation design: great badge holder for those need multiple badges, drivers license, debit cards, Airports, laundry card, Government Employees and More, cards, suitable for ID badges, School ID, tickets and money Offices, etc.

Id's, name cards or business cards, keys - all of these could fit into this specially designed PU LEATHER badge holder. Strong lanyard: 1pc strong yet soft 20" PU Leather detachable Neck Lanyard for the holder. Material: id holder and lanyard are made by pu leather, and combine with top grade hardware with safety side zipper and back closer.

No need to worry about cards could accidentally slip out or lanyard rips any more. Size: holder size: 4. 8"l x 3. 5"w12. 2cm x 8. 9cm; 20"lanyard full round length. This badge holder with large capacity. Badge holder structure: 1 clear id window + 1 open card slot with pull tab front + 3 covered card slots back + 1 rfid blocked cash slot with zipper pocket side.
BrandELV #ad
ManufacturerELV #ad
Height4.8 Inches
Length5.8 Inches
Weight0.11 Pounds
Width0.5 Inches
Part NumberID-Holder-PU-Black

9. ID Stronghold

#ad

FIPS 201 Approved, Duolite 2 Card ID Holder, Heavy Duty Hard Plastic ID Badge Holder, Molded and Assembled in The USA, ID Stronghold, Red, Poly Carbonate, RFID Blocking Secure Badge Holder

#ad
ID Stronghold #ad - Slim design: looks sharp and available in 9 colors to match your uniform, work or business attire. Rfid shielded: protect your credentials with our FIPS201 Approved badge holder, for 13. 56mhz cards. Usa made: molded and Assembled by our expert team in Florida facilities, millions shipped worldwide. Indestructible: Molded from Poly Carbonate for military level toughness and durability. 2 card holder: conveniently carry two key cards, held tight so you never lose your identification.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height0.31 Inches
Length4 Inches
Weight0.04 Pounds
Width2.38 Inches
Part NumberIDSH2004-001B

10. ID Stronghold

#ad

FIPS Approved Badge Holder, RFID Blocking Badge Holder Dual Clip DuoLite by Identity Stronghold, 100% USA Made Black

#ad
ID Stronghold #ad - 100% made in USA! This badge holder can hold two cards! Blocks rfid chips in cards from being read without permission. Physically protects card, weather and water resistant. Fips 201 approved Products List.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height0.31 Inches
Length3.63 Inches
Weight0.04 Pounds
Width2.75 Inches
Part NumberIDSH2004-002B
ModelIDSH2004-002B