Top 10 Polycarbonate Badge Holder – Badge Holders

As an Amazon Associate I earn from qualifying purchases.

1. GOVO

#ad

GOVO Badge Holder/Wallet, Durable Polycarbonate ID/Credit Holder with Metal Clip and 4 Cards Slot Holds 1to 4 Cards Black

#ad
GOVO #ad - Patented clip: the first and only badge holder with a metal clip allow you to carry your ID on your belt, pocket, key chain, backpack or a lanyard. Durable and light weight: the holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners.

The steel clip can also be used as a cash clip. The spring holds cards on the sides so it won’t damage your cards or let them slip out. Weights 1. 4 oz. Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards. The clip is made from manganese steel making it strong and durable.

Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity. Designed and engineered by govo in ohio, usa. You can carry your credit cards, driver license and work ID all in one in this compact holder. The opening on top of the clip is designed for connecting to lanyard or carabiner. Unlike plastic retainer, metal spring does not lose elasticity.
BrandGOVO #ad
ManufacturerGOVO #ad
Height0.38 Inches
Length3.8 Inches
Weight0.08 Pounds
Width2.6 Inches
Part NumberGOVO_BK_P

2. ID Stronghold

#ad

USA Molded and Assembled, FIPS 201 Approved, Black, ID Stronghold, Heavy Duty Hard Plastic ID Badge Holder, Poly Carbonate, Duolite 2 Card ID Holder, RFID Blocking Secure Badge Holder

#ad
ID Stronghold #ad - Slim design: looks sharp and available in 9 colors to match your uniform, work or business attire. 2 card holder: conveniently carry two key cards, held tight so you never lose your identification. Indestructible: Molded from Poly Carbonate for military level toughness and durability. Usa designed, molded and assembled - Our slim polycarbonate frame is tough as nails and will last you for years! Rfid shielded: protect your credentials with our FIPS201 Approved badge holder, for 13. 56mhz cards.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height0.31 Inches
Length4 Inches
Weight0.04 Pounds
Width2.38 Inches
Part NumberIDSH2004-001B
ModelIDSH2004-001B

3. GOVO

#ad

Without Clip Version, Durable Polycarbonate ID Card Holder Holds 1 to 4 Cards Black, GOVO Badge Holder

#ad
GOVO #ad - You can carry your credit cards, driver license and work ID all in one in this compact holder. The spring holds cards on the sides so it won’t damage your cards or let them slip out.

Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards. The holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners. This is the light weight without-clip version of govo t4 badge Holder. Unlike plastic retainer, metal spring does not lose elasticity. Designed and engineered by govo in ohio, usa. It weights 1. 2 oz. Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity. Built to last: the eyelet for connecting to lanyard or carabiner is made from manganese steel making it strong and durable.
BrandGOVO #ad
ManufacturerGOVO #ad
Part NumberNC_90000

4. Specialist ID

#ad

Slim Heavy Duty Badge Holders, Hard Plastic Clear Polycarbonate Holds 1 Card Rigid Top Load Single Card Case, 3 Pack, Vertical Easy Access Thumb Slide Hole & UV Protection by Specialist ID

#ad
Specialist ID #ad - Transparent with uv protection - clear with Slightly Frosted Plastic that Protects UV and Refracts Light to Prevent Glare off of Your Photo Idbadge. Top load - never worry about card falling out again - vinyl badge holders can come apart at the seams, side load holders are a little More Secure, But a Top Loading Hard Plastic Poly-Carbonate Resin Case is the Most Secure Option Available! More secure lanyard / strap attachment - the polycarbonate lanyard Slot Hole on Back Works Best with a Vinyl Badge Strap, but Holds MUCH Better Than The Competition When Used with Metal Swivel Hook Neck Lanyards.

Super heavy duty protector - no more broken cards - this slim and sleek design is perfect for office keycards, smart piv, cac, twic and all standard 8030 proxy Cards Drivers License / Credit Card Size - NOTE - DOES NOT FIT WITH THICKER CARDS HID PROXCARD II CLAMSHELL.

They are also iso certified and are Compatible with Any Other Badge Holder You Order from Specialist ID. Connects to any lanyard or badge reel not included - we offer these heavy duty gsa compliant card cases to work perfectly With any Retractable Reels or Lanyards You are Already Using.
BrandSpecialist ID #ad
ManufacturerSpecialist ID #ad
Part NumberSPID-1400
ModelSPID-1400

5. Pawfly

#ad

2 Pack, Pawfly Heavy Duty 2-Card Badge Holder Polycarbonate Vertical Thumb Slots with Retractable Badge Reel Carabiner Clip

#ad
Pawfly #ad - Carabiner & belt clip: easily secure it onto shirt pockets, belt loops, backpacks, pocket or purses. Durable: badge reel tested to withstand 100, 000 pulls.

Does not fit for thicker cards. Thumb slots to slide cards up and out. Crystal clear Poly-carbonate for maximum transparency and durability. Multi-purpose: great for anyone needing to Access Two Cards Frequently. Easily access: retractable 24" nylon cord for a smooth extension, allows quick access to Two ID cards. Ideal for hospital staff, nurses, employees, and police officers.2-card holder: heavy duty badge holder holds 2 standard credit cards sized 3-3/8 by 2-1/8 inch vertical badges.
BrandPawfly #ad
ManufacturerPawfly #ad
Part NumberPawfly-UL288-CA-1

6. KEY-BAK

#ad

Key-Bak Super48 HD 8oz. Locking Retractable Key Holder, Oversized Split Ring, Black Polycarbonate Case, Steel Belt Clip, 48" Retractable Cord

#ad
KEY-BAK #ad - Heavy duty aramid Fiber cord with an 80 lb. Minimum breaking strength. Belt clip options fits belts up to 1. 8" and locks with the included Pin. Oversized 1-1/4 inch Black split-ring. Heavy duty steel oversized 1-1/4 inch Black split-ring. Protected by a 1-year limited Warranty and lifetime service Policy. Made in the usa and proven to last more than 1-million pulls. Leather loop options fit up to 2. 25" duty belts common in law enforcement. 2-1/4" diameter black, lightweight, shatter resistant Polycarbonate case.
BrandKEY-BAK #ad
ManufacturerKEY-BAK #ad
Height1.18 Inches
Length1.57 Inches
Weight0.22 Pounds
Width0.39 Inches
Part NumberS48K
ModelS48K
Warranty1-Year Limited Warranty

7. Specialist ID

#ad

Hard Plastic with Heavy Duty Breakaway Lanyard w Quick Release Metal Clip & Key Ring One Holder / 3 Cards Inside Black, Specialist ID Vertical Top Load Three Card Badge Holder

#ad
Specialist ID #ad - Quick release lanyard with safety breakaway clasp - features a detachable keychain with Metal Badge Clip - Carries Your Work Badges and Keys. Rigid & rugged polycarbonate plastic - hard plastic vertical format i.

D. Badgeholder with heavy duty safety break away neck cord lanyard - Protect Your Valuable Access, PIV, CAC, TWIC or Government Employee Name Badge from Damage and Loss. Carry all your cards in one holder - tough multi-card protector holds common access smartCards and Proxy Key-cards in One Case - Perfect for When Needed on a Regular Basis FAA, Security Access, Military, Port Authority, TSA, Customs, and Department of Homeland Security.

Top loading & fully enclosed for 2 - 3 cards - all cards load from Top of Sturdy Rigid Case Can Hold 3 Standard CR80 30 Credit / Drivers License Sized Badges. Clear front window - front badge has visible display for picture ID’s, Dual Thumb Lever on the Back Can Slide up Smart Chip Cards or Swipe & RFID Prox Access Cardbadges.
BrandSpecialist ID #ad
ManufacturerSpecialist ID #ad
Height1.1 Inches
Length4.4 Inches
Weight0.1 Pounds
Width2.8 Inches
Part NumberSPID-9070
ModelSPID-9070

8. GOVO

#ad

Titanium GOVO Badge Holder/Wallet, ID Card Holder with Metal Clip and 4 Cards Slot

#ad
GOVO #ad - You can carry your credit cards, driver license and work ID all in one in this compact holder. The spring holds cards on the sides so it won’t damage your cards or let them slip out. Designed and engineered by govo in ohio, usa.

The opening on top of the clip is designed for connecting to lanyard or carabiner. Long-lasting: the holder’s main body is milled from one piece of Titanium making it strong, durable, water resistant and sweat resistant. Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity. Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards.

Titanium version weights 2. 7 oz. Unlike plastic retainer, metal spring does not lose elasticity. Patented clip: the first and only badge holder with a metal clip allow you to carry your ID on your belt, key chain, pocket, backpack or a lanyard. The steel clip can also be used as a cash clip. The clip is made from manganese steel making it strong and durable. The transparent screen is made from 2mm thick polycarbonate.
BrandGOVO #ad
ManufacturerGOVO #ad
Height0.38 Inches
Length3.8 Inches
Width2.6 Inches
Part NumberGOVO00860415002088

9. Specialist ID

#ad

Heavy Duty Crystal Clear 2 Card Badge Holder Holds Two Cards, Vertical Dual Sided Card Cases, Polycarbonate Rigid/Hard Plastic with Secure Top Load by Specialist ID 1 Single Item

#ad
Specialist ID #ad - Vertical portrait top load insert - id cards fit snug and won't fall out - Load In From the Top - Dimensions Insert - 2. 13" x 3. 38" 2 1/8 x 3 3/8.

Thumb notches to remove i. D. Rigid hard plastic badge holder - heavy duty clear polycarboNATE - Secure, Strong Protector Cover Prevents Badges from Bending or Breaking. Crystal clear transparent id view- non-frosted it's so clear you can scan a barcode through The Front - Also Works for RFID and PROX Scanner Reader. Holds two thin badges - best for two thin badges Example - Driver's License, Access Key Card or Metrocard = Perfect Fit. Badges - easy to slide out to scan, show, swipe, or Tap - Slot Hole Attachment to Use with Lanyard or Vinyl Strap Clip Retractable Reel.
BrandSpecialist ID #ad
ManufacturerSpecialist ID #ad
Height0.4 Inches
Length3.5 Inches
Width2.45 Inches
Part NumberSPID-6560
ModelSPID-6560

10. Specialist ID

#ad

Rigid Case Easy Access with Thumb Notch Dispenser by Specialist ID, Single CR80 30 Mil, Slim Heavy Duty Horizontal ID Badge Holders, Hard Plastic Holds 1 Card Clear Polycarbonate, Bulk 50 Pack

#ad
Specialist ID #ad - Perfect for any workplace- a durable high quality i. D. Name badgeholder for any employee that uses one single badge credit card Size 3 ⅜ x 2 ⅛ - Great for Nursing, TSA, Law Enforcement, Office, FAA, Security, Airport, Government Photo Identity Display.

No extra Bulk. Rugged & secure top attach point Slot for Lanyards, ID Clips, and Badge Reels. Built tough for everyday use - polycarbonate id protector is practically unbreakable Compared to the Cheap PVC Models Available. These last yEARS not Days. Slim and sleek single card design - horizontal / landscape Orientation These Are the Perfect fit for Your Standard CR80 Proximity Proxy 30 Mil Card.

Easy access with thumb notch slide - easy side loading to Remove Your Card for Magstripe Swiping or Chip Insertions - Proxy Cards Can Be Read While Inside The Holder. Uv protection prevents fading- transparent frosted Texture Cover That Refracts Light to Prevent Glare.
BrandSpecialist ID #ad
ManufacturerSpecialist ID #ad
Part NumberSPID-1420