RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4×4 Black

#ad
HRP Distribution RPM80702 #ad - Rpm a-arms are molded in their trademark blend of incredibly durable nylons and are backed by an industry leading warranty. As a bonus, RPM cut 6. 5 grams of weight off of each a-arm for a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions. For the traxxas slash 4x4 and Stampede Front or Rear A-arms.

. Key featurescompatible with the Slash 4x4, Stampede 4x4 and Rally 4x4Each Arm is 6. 5 grams lighter than stockone pair of arms included for front or rear of vehicleOverviewAdd strenth while reducing weight on your Traxxas Slasy 4x4, Stampede 4x4 or Rally 4x4 with these front or rear A-arms from RPM. Backed by rPM's world-renowned breakage warranty.

Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! Rpm tightened the tolerances around the hinge pins, reducing the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90%. The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the rear axle.

RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black #ad - Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Tech notes: two packages will be needed to complete one truck. Rpm a-arms carry over their traditional look with 30 degree leading and trailing edges and huge bosses for the shocks and sway bar mounts.

#ad



80732 Rear Bearing Carriers Black Slash 4x4 Stampede 4x4 Pack of 32 - RPM RPM

#ad
HRP (Level 3 Products) RPM80732 #ad - Additionally, the bearing bores in the bearing carriers are designed to hold the bearings tight, meaning absolutely no bearing slop in the bearing bores. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States.

Rpm has also reduced the endplay of the axles by approximately 1/64", keeping your rear end tracking perfectly like it's supposed to. For all of the following vehicles:slash 4x4, nitro rustler, Hawk 2, nitro sport, Rad 2, Stampede 4x4, Nitro Stampede, Eagle and Blue Eagle LSII. Tech notes: rpm rear bearing carriers replace Traxxas stock #1952.

Rpm rear bearing Carriers are sold without bearings. Overviewrpm's rear bearing carrier version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly. Backed by rPM's world-renowned breakage warranty. A ring surrounds the bearing bores, providing additional rigidity while a redesigned camber rod mounting boss helps disperse impact energy more evenly throughout the length of the carrier's arm.

80732 Rear Bearing Carriers Black Slash 4x4 Stampede 4x4 Pack of 32 - RPM RPM #ad - And of course, these carriers are made from RPM's trademark blend of nylon. While designed with the traxxas slash 4x4 in mind, hawk 2,  these bearing carriers are direct replacement parts for all of the following vehicles as well: Nitro Rustler, Rad 2, Nitro Sport, Nitro Stampede, Eagle & Blue Eagle LSII.

#ad



RPM Caster Blocks and Steering Blocks for Traxxas Slash 4x4, Stampede 4x4, and Rally, Black

#ad
HRP Distribution RPM73592 #ad - Rpm answers the call with our Caster & Steering Blocks for these awesome trucks. More material surrounds the kingpin posts while smoother flowing turnbuckle arms assure consistent feel and performance from the steering system. Sold as a set, including 2 caster blocks and 2 spindle blocks. Rpm rear bearing Carriers are sold without bearings.

Rpm steering blocks have also been reengineered for durability, strength, rigidity and crash-survivability. For all of the following vehicles:slash 4x4, rad 2, nitro sport, Nitro Stampede, Nitro Rustler, Hawk 2, Stampede 4x4, Eagle and Blue Eagle LSII. Tech notes: rpm rear bearing carriers replace Traxxas stock #1952.

RPM Caster Blocks and Steering Blocks for Traxxas Slash 4x4, Stampede 4x4, and Rally, Black #ad - Since the release of the first slash 4x4, RPM customers have been asking for stronger front end components that could handle the punishment Traxxas 4wd trucks can dish out. Running any part of this system with other stock or aftermarket steering blocks or caster blocks may void the RPM warranty. Our slash 4x4 / stampede 4x4 front-end components are made from our trademark blend of indestructible materials and come factory backed by our limited lifetime warranty for strength and durability you know you can trust!

Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. The core design of our caster blocks revolve around the lower-case "H" structure which provides extreme rigidity to keep camber and caster setting locked in place while running normally, yet our materials provide serious impact absorption characteristics to prevent breakage when those "oops" moments inevitably arise.

We started with a blank slate, drew in the necessary design elements and built an all-new design with a focus on punishment survivability.

#ad



RPM 80022 Front Bumper and Skid Plate Black Slash 4x4 Black

#ad
HRP Distribution RPM80022 #ad - These parts are not interchangeable with stock or aftermarket steering blocks / caster blocks. Backed by rPM's world-renowned breakage warranty. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States. Backed by rPM's world-renowned breakage warranty.

Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! Rpm rear bearing Carriers are sold without bearings. For all of the following vehicles:slash 4x4, nitro rustler, Stampede 4x4, nitro sport, Hawk 2, Rad 2, Nitro Stampede, Eagle and Blue Eagle LSII.

RPM 80022 Front Bumper and Skid Plate Black Slash 4x4 Black #ad - Tech notes: rpm rear bearing carriers replace Traxxas stock #1952. For use on the 4x4 Slash. Designed to take some serious abuse without failing. Running any part of this system with other stock or aftermarket steering blocks or caster blocks may void the RPM warranty. Sold as a set, including 2 caster blocks and 2 spindle blocks.

. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability.

#ad



RPM 80122 Rear Bumper Black Slash 4x4 Black

#ad
HRP Distribution RPM80122 #ad - Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Rpm rear bearing Carriers are sold without bearings. Backed by rPM's world-renowned breakage warranty. Running any part of this system with other stock or aftermarket steering blocks or caster blocks may void the RPM warranty.

For use on the 4x4 Slash. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! Backed by rPM's world-renowned breakage warranty. Backed by rPM's world-renowned breakage warranty. Key featuresmodeled after full-sized short course and desert racing trucks for authentic scale realismhas a blend of rigidity and flexibility to absorb those nasty rear collisions without transferring huge amounts of impact energy into the more fragile components of the chassisThese bumpers come stock with mounting positions for RPM mud flaps and and RPM Tail Light Kits For all of the following vehicles:slash 4x4, nitro sport, Nitro Stampede, Nitro Rustler, Stampede 4x4, Hawk 2, Rad 2, Eagle and Blue Eagle LSII.

RPM 80122 Rear Bumper Black Slash 4x4 Black #ad - Tech notes: rpm rear bearing carriers replace Traxxas stock #1952. Sold as a set, including 2 caster blocks and 2 spindle blocks. These parts are not interchangeable with stock or aftermarket steering blocks / caster blocks. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA!

#ad



RPM 70392 Front Shock Tower Slash/Stampede 4x4 Black

#ad
HRP Distribution RPM70392 #ad - Rpm rear bearing Carriers are sold without bearings. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. For use on the 4x4 Slash. Designed to take some serious abuse without failing. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA!

Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! Sold as a set, including 2 caster blocks and 2 spindle blocks. Backed by rPM's world-renowned breakage warranty. Designed to take some serious abuse without failing. Designed to take some serious abuse without failing.

RPM 70392 Front Shock Tower Slash/Stampede 4x4 Black #ad - For the traxxas Slash 4x4 & Stampede 4x5. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. These parts are not interchangeable with stock or aftermarket steering blocks / caster blocks. For use on the 4x4 Slash. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability.

Backed by rPM's world-renowned breakage warranty.

#ad



Tekno RC 6855 Big Bone Center Driveshaft and Outdrives

#ad
HRP Distributor CA TKR6855 #ad - Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! These parts are not interchangeable with stock or aftermarket steering blocks / caster blocks. For use on the 4x4 Slash. Backed by rPM's world-renowned breakage warranty. Backed by rPM's world-renowned breakage warranty.

Lightweight aluminum shaft, hardened steel outdrives. Fat, big bone shaft is much stronger than stock. First off it's fat!  Yet it's still extremely lightweight. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability.

Tekno RC 6855 Big Bone Center Driveshaft and Outdrives #ad - The tekno rc big bone driveshaft and outdrives for the Slash 4×4 and Stampede 4×4 solves the many issues associated with the stock center driveline. For use on the 4x4 Slash. Dog bone design will not bind, split, or bend like the stock unit. Running any part of this system with other stock or aftermarket steering blocks or caster blocks may void the RPM warranty.

Backed by rPM's world-renowned breakage warranty. Backed by rPM's world-renowned breakage warranty.

#ad



Traxxas 6834 Complete Suspension Pin Set F&R

#ad
Traxxas TRA6834 #ad - Lightweight aluminum shaft, hardened steel outdrives. This is the 6834 suspension Pin Set Slash 4X4 from Traxxas. Steel construction. Designed to take some serious abuse without failing. For the traxxas Slash 4x4 & Stampede 4x5. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running.

Designed to take some serious abuse without failing. These parts are not interchangeable with stock or aftermarket steering blocks / caster blocks. Traxxas, truly the fastest name in Radio Control. Replacement for worn or damaged suspension pins. Backed by rPM's world-renowned breakage warranty. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability.

Traxxas 6834 Complete Suspension Pin Set F&R #ad - Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States. This is for use on rc vehicles such as the Traxxas Slash 4x4; consult your user's manual for exact parts listings. Sold as a set, including 2 caster blocks and 2 spindle blocks. For all of the following vehicles:slash 4x4, stampede 4x4, nitro sport, Nitro Rustler, Hawk 2, Rad 2, Nitro Stampede, Eagle and Blue Eagle LSII.

Tech notes: rpm rear bearing carriers replace Traxxas stock #1952.

#ad



RPM 70362 Rear Shock Tower Slash/Stampede 4x4 Black

#ad
HRP Distribution RPM70362 #ad - Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! Fat, big bone shaft is much stronger than stock. Silver in color. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA!

Rpm rear bearing Carriers are sold without bearings. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States. Running any part of this system with other stock or aftermarket steering blocks or caster blocks may void the RPM warranty. Replacement for worn or damaged suspension pins.

RPM 70362 Rear Shock Tower Slash/Stampede 4x4 Black #ad - . Backed by rPM's world-renowned breakage warranty. For use on the 4x4 Slash. Sold as a set, including 2 caster blocks and 2 spindle blocks. For the traxxas Slash 4x4 & Stampede 4x4. Backed by rPM's world-renowned breakage warranty. This is for use on rc vehicles such as the Traxxas Slash 4x4; consult your user's manual for exact parts listings.

#ad



Traxxas 3340 Cooling Fan Velineon ESC

#ad
Traxxas TRA3340 #ad - Backed by rPM's world-renowned breakage warranty. Rpm rear bearing Carriers are sold without bearings. This product is made from high quality materials and designed for lasting performance. Sold as a set, including 2 caster blocks and 2 spindle blocks. Accessory cooling Fan reduces ESC temperatures during extended operation for maximum power flow.

Running any part of this system with other stock or aftermarket steering blocks or caster blocks may void the RPM warranty. This product is made from high quality materials and designed for long-lasting performance. Dog bone design will not bind, split, or bend like the stock unit. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Traxxas 3340 Cooling Fan Velineon ESC #ad - Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. It securely clips onto the VXL-3s heatsink for easy installation. Backed by rPM's world-renowned breakage warranty. These parts are not interchangeable with stock or aftermarket steering blocks / caster blocks. Wires are neatly routed thanks to the integrated connector clip.

Designed to take some serious abuse without failing. Fat, big bone shaft is much stronger than stock.

#ad



Pro-Line Racing 608700 Extended Front and Rear Body Mounts for Slash 4 x 4

#ad
HRP (Level 3 Products) PRO608700 #ad - Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! Integrated Connector Clip. Backed by rPM's world-renowned breakage warranty. Accessory cooling Fan reduces ESC temperatures during extended operation for maximum power flow. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability.

For the traxxas Slash 4x4 & Stampede 4x5. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! Made from Ultra-Durable Nylon. Long body mounts included to fit Rally Car Bodies. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability.

Pro-Line Racing 608700 Extended Front and Rear Body Mounts for Slash 4 x 4 #ad - Backed by rPM's world-renowned breakage warranty. Running any part of this system with other stock or aftermarket steering blocks or caster blocks may void the RPM warranty. For use on the 4x4 Slash. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Wires are neatly routed thanks to the integrated connector clip.

Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA!

#ad